TAVAS 3000 rpm big power single cylinder diesel engine
TAVAS 1103F engine
The 1103F is currently the largest commercial single-cylinder air-cooled diesel engine. It can support a 50Hz generator with a rated power of 10kW at 3000rpm and demonstrates good vibration and noise performance. It is currently the most cost-effective high-power air-cooled generator in the market.
| Technical data | |||||
| Engine model | 1100F(E) | 1103F(E) | |||
| Type | Air-cooled, 4 stroke, diesel engine. | ||||
| Combustion system | Direct injection | ||||
| No. of cylinder | 1 | 1 | |||
| Bore x stroke | mm | 100*85 | 103*88 | ||
| Displacement | cc | 667 | 720 | ||
| Engine speed | rpm | 3000 | 3600 not supported | 3000 | 3600 not supported |
| Max output | kW | 9.8 | / | 12.7 | / |
| Continuous output | kW | 9.1 | / | 11.7 | / |
| PTO system | Crankshaft or Camshaft(1/2 rpm) | ||||
| PTO type | Straight key, Taper, Thread, Spline | ||||
| Starting System | Manual or electric | ||||
| Cooling System | Forced air-cooling by fly wheel fan | ||||
| Lubrication System | Forced lubrication at multiple points | ||||
| Lubrication oil type | SEA class: CD grade or higher(10W30) | ||||
| Lubrication Volume | L | 2.5 | 2.5 | ||
| Fuel type | 0#(summer) or 10#(winter) light diesel fuel | ||||
| Fuel tank capacity | L | 5.5 | 5.5 | ||
| Fuel consumption rate | g/kW.h | <270 | / | <270 | / |
| Noise level | |||||
| Sound pressure level(Lpa) at 7m | dB(A) | 76 | / | 77 | / |
| Sound power level(Lwa) | dB(A) | 99 | / | 100 | / |
Confirm the crankshaft type, size and RPM before signing the
purchase contract. Inform the manufacturer of the purpose of
the engine to get more professional advice.
Customizable PTO types:
Stragiht Key shaft
Tapered shaft
Threaded shaft
Spline shaft
Choose the right air filter for different usage environments.
Clean and replace the filter element in time to avoid reducing
the air intake and affecting the engine power.
Customizable air filter:
Semi-dry type
Oil bath type
Cyclone type
Dual-stage type
<<< Nitride-treated, reinforced crankshafts for high strength industrial requirements.
Before assembly, the main transmission components of the engine, such as the crankshaft, piston, and connecting rod bearings, undergo ultrasonic cleaning and manual cleaning to ensure that the critical parts are free from impurities and iron filings, thus ensuring the engine's long lifespan.
In order to enhance the precision of the engine, TAVAS marks each crankshaft and connecting rod bearing with ± tolerances and pairs them during assembly to reduce friction and clearance during engine operation, thereby achieving optimal performance.
Tuning of piston position for each engine >>>
Each engine's piston position, oil pump supply angle, extension length, and compression ratio are individually adjusted to ensure optimal combustion.
Crankshafts, camshafts and balance shafts
all equipped with top class bearings(NSK or same level)
ensure smooth engine operation, and extend the service life.
High-strength engine cases, sealed and fixed with high-strength mild steel bolt sealant of 12.9 and 10.9 grades, with automated pressurized airtightness testing. Ensure the performance under high compression ratio combustion explosion.
After the engine is assembled, it enters the test room for more than 20 minutes of continuous running test, and the performance data is permanently recorded in the factory database.
After the engine test is qualified, drain the oil, clean the whole body and packing.
